DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Features and technical reference
1546Tenant Partitioning
20
■Malicious Call Trace
By default, Malicious Call Trace extensions are assigned to tenant partit ion
1. Therefore, if Malicious Call Trace is enabled, any telephone with
permission to call tenant partition 1 can use it.
■Multiple Listed Directory Numbers
Each Listed Directory Number is assigned to a tenant partition.
■Multiple Audio/Music Sources for Vector Delay
When an audio source is specified by a wait-time <time> hearing
<treatment> vector step, the audio source assigned to the t enant number of
the active VDN is the one that plays.
If you use a wait-time <time> hearing <extension> then <treatment 2>
command where the <extension> is an audio s ource (assigned on the
Announcements/Audios Sources form), that audio source will play instead
of the one associated with the active VDN. For information on
administering multiple audio sources see the DEFINITY ECS Call
Vectoring/EAS Guide or DEFINITY BCS and Guestworks Call Vectoring
Guide.
■Music-on-Hold Access
When Tenant Partitioning is enabled, you can assign a unique source for
music to each tenant. If Tenant Partitioning on the System-Parameters
Customer-Options form is set to y, you must use the Music Sources form to
administer music-on-hold.
■Night Service
Each tenant can have its own Listed Directory Number (LDN) night
destination, Trunk Answer on Any Station (TAAS) port, or night atten dant .
■PC Interfaces
You must assign each PC interface to a tenant partition.
■PC/PBX Connections
You must assign each PC/PBX Connection to a tenant partition.
■PC/ISDN
You must assign each PC/ISDN to a tenant partition.
■Remote Access
You must assign each Remote Access barrier code to a tenant.
■Traffic Studies
Traffic studies do not report the tenant p artition number of the extension or
trunk group used. You must infer the tenant partition number must be
inferred from the extension or trunk-group number.