DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
System basics
12Using the bulletin board
1
Posting a message
In our example, we post a message to the bulletin board about a problem with a
new trunk group, and a Lucent representative replies to our message.
To post a message to the bulletin board:
1. Type change bulletin-board and press RETURN.
The Bulletin Board screen appears. There are three pages of mess age sp ace
within the bulletin board. The first page has 19 lines, b ut you ca n only ente r
text on lines 11-19. The first 10 lines on page 1 are for high-priority
messages from Lucent Technologies personnel and are noted with an
asterisk (*). The second and third pages each have 20 lines, and you can
enter text on any line. The system automatic ally enters the date the message
was posted or last changed to the right of each message line.
2. Type your message.
You can enter up to 40 characters of text per line. You also can enter one
blank line. If you enter more than one blank line, the system consolidates
them and displays only one. The system also deletes any blank line if it is
line one of any page. You cannot indent text on the bulletin board. The TAB
key moves the cursor to the next line.
3. Press ENTER to save your changes.
Deleting messages
To delete a message from the bulletin board:
1. Type change bulletin-board and press RETURN.
The Bulletin Board screen appears.
Message (* indicates high-priority) Date
*Lucent is in the process of 03/02/98
*investigating your trunk lockup problem. 03/02/98
*The Bulletin Board will be updated as 03/02/98
*we find information. 03/02/98
*
*
*
*
*
*
We recently added a new trunk group (14) 03/02/98
and have had many of the members getting 03/02/98
locked up. 03/02/98