DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Managing announcements
366Adding announcement data modules
13
Instructions
To set up the announcement data module, determine the port location of the
Announcement circuit pack or the Auxiliary Trunk circuit pack. You can find
circuit pack information on the Integrated Announcement Board screen.
To set up the data module on the Announcement circuit pack located at 01B18:
1. Type add data-module next and press RETURN.
The Data modules screen appears.
The system automatically fills in the number of the next available
extension. Make sure the extension conforms to your d ial plan. If you want
to assign a specific extension, type that extension in the command instead
of “next.”
2. In the Name field, type announcement data module.
3. In the Type field, type announcement and press RETURN.
The Port field automatically changes to Board.
4. In the Board field, type 01B18.
This is the address of the announcement circuit pack.
5. Press ENTER to save your changes.
DATA MODULE
Data Extension: 2002 Name: announcement data module
Type: announcement COS: 1
Board: 01B18 COR: 1
ITC: restricted__ TN: 1
ASSIGNED MEMBER (Station with a data extension button for this data module)
Ext Name
1: ____ __________________________