DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Screen reference
863Remote Call Coverage Table
17
Permanently Disable
Reactivation of remote access to the interface requires Lucent Services
intervention.
Disable Following a Security Violation
This field appears on the screen when the SVN Authorization Code Violation
Notification Enabled field on the Security-Related System Parameters screen is
set to y.
Related Topics
Refer to ‘‘Setting up remote access’’ on page 297 for st ep-by-step instructions for
configuring remote access.
Refer to ‘‘Remote Access’’ on page 1466 for a description of this feature.
Remote Call Coverage Table
The Remote Call Coverage Table allows you to provide automatic redirection of
certain calls to alternate non-local answering positions in a coverage path.
Non-local numbers may be any ARS or AAR number, any number on the public
network, any international number, or a UDP/DCS extension up to 16 digits,
which includes any ARS/AAR facility access code, any trunk dial access code
(TAC), long distance dialing code, or international dial code. Up to 999 remote
call coverage points can be entered on the 23 pages of this screen.
Valid entries Usage
y/n Enter y to permanently block remote access to the
administration interface.
Valid
entries Usage
y/n Enter y to disable the remote access feature following detection of a
remote access security violation. The system administrator can
re-enable Remote Access using the enable remote access command.