DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Screen reference
665Feature-Related System Parameters
17
US NI Calling Name for Outgoing Calls?
Field descriptions for page 7
Screen 91. Feature-Related System Parameters screen
Valid entries Usage
y/n Enter y to send a name on outgoing calls over NI PRI trunks.
Important: Be sure you have validated that your service
provider’s central office is capable of accepting calling name
information from DEFINITY in this way. For example, if the
central office switch is a 5ESS, it must be a generic 5EXX or
later. Failure to validate the central office capability may cause
the central office to drop outgoing calls from your switch. In
this case, change the value in this field to n.
Enter n to prevent sending calling name information with
outgoing calls over NI PRI trunks. n is this field overrides a y
in the Send Name field of the outgoing trunk group screen.
change system-parameters features Page 7 of 10
FEATURE-RELATED SYSTEM PARAMETERS
Pull Transfer: n Update Transferred Ring Pattern? n
Outpulse Without Tone? y Wait Answer Supervision Timer? n
Misoperation Alerting? n Repetitive Call Waiting Tone? y
Allow Conference via Flash? y Repetitive Call Waiting Interval (sec): _
Vector Disconnect Timer (min): __ Network Feedback During Tone Detection? y
Hear Zip Tone Following VOA ? y System Updates Time On Station Displays? n
Intercept Treatment On Failed Trunk Transfers? n
Station Tone Forward Disconnect: silence
Level Of Tone Detection: precise
Charge Display Update Frequency (seconds): 30
Date Format on 6400/8400 Terminals: mm/dd/yy
On-hook Dialing on 6400/8400 Terminals? n
RECALL TIMING
Flashhook Interval? y Upper Bound (msec): 1000
Lower Bound (msec): 200
Forward Disconnect Timer (msec): 600
ITALIAN DCS PROTOCOL
Italian Protocol Enabled? y
Apply Intercept Locally? _ Enforce PNT-to-PNT Restrictions? _