DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Screen reference
570Data modules
17
Endpoint Type
Used with X.25 Data Modules. An endpoint type is a type of packet switched d ata
endpoint that uses X.25 call control procedures. The X.25 Endpoint connects to
external ports on the PGATE board and to the TDM bus via a DS1 trunk. Ports
connected to the adjunct endpoint can be either DTEs or DCEs. The type of
endpoint (DTE or DCE) is administrable on the “data-mod” screen.
Link
Used with X.25, Ethernet, Point-to-Point, and Processor Interface data modules.
Refer to DEFINITY ECS Administration for Network Connectivity for more
information. This field is in different locations on the screen for different data
module types.
DTE/DCE
Used with X.25 Data Modules. Specifies how the above endpoint type acts.
Error Logging
Used with X.25 Data Modules.
Permanent Virtual Circuit
Used with X.25 Data Modules.
Valid entries Usage
adjunct Mandatory entry
Valid entries Usage
dte Data Terminal Equipment
dce Data Communications Equipment
Valid entries Usage
y/n Enter y to record X.25 protocol errors in the hardware error
log. Refer to the DEFINITY Enterprise Communications
Server Maintenance manual for more information about error
logs.
Valid entries Usage
y/n Enter y to indicate that the logical channels for PVC are
allowed for this port. Cannot be changed.