DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Collecting billing information
440Collecting information about calls
16
Instructions
In this example, we are going to establish call detail recording for all calls that
come in on trunk group 1 (our CO trunk). We are going to set u p CDR so t hat any
call that is handled by an attendant produces a separate record for the attendant
part of the call.
1. Type change trunk-group 1 and press RETURN.
The Trunk Group screen appears.
2. In the CDR Reports field, type y.
This tells the switch to create call records for calls made over this trunk
group.
3. Press ENTER to save your changes.
4. Type change system-parameters cdr and press RETURN.
The CDR System Parameters screen appears.
TRUNK GROUP
Group Number: 1 Group Type: co CDR Reports: y
Group Name: Outside calls COR: 85 TN: 1__ TAC: 105
Direction: two-way Outgoing Display? n
Dial Access? n Busy Threshold: 99 Night Service: 1234
Queue Length: 0 Country: 1 Incoming Destination: attd
Comm Type: voice Auth Code? n Digit Absorption List: _
Prefix-1? y Trunk Flash? n Toll Restricted? y
TRUNK PARAMETERS
Trunk Type: ground start
Outgoing Dial Type: tone Cut-Through? n
Trunk Termination: rc Disconnect Timing(msec): 500_
Auto Guard? n Call Still Held? n Sig Bit Inversion: none
Trunk Gain: high
Disconnect Supervision - In? y Out? n
Answer Supervision Timeout: 10 Receive Answer Supervision? n