![](/images/backgrounds/206171/bg4c8.png)
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Features and technical reference
1200Call Coverage
20
■Hold
If a user places a call on hold, the display returns to normal mode. The user
must press disp-chrg again to view call charges, or if automatic charge
display is enabled, must wait for the display to refresh.
■Last Number Dialed
Users can view the dialed number while active on a call by pressing the
stored-numb button, then the last-numb button. To view call charges again,
the user must then press the disp-chrg button, or (if Automatic Charge
Display is part of the user’s COR) the Normal button.
■QSIG
In any configuration where a branch system has no direct connection to the
public network, the private network does not pass call charge information
to these branches.
■System Resets
If you perform a warm reset while calls are active with charge display, the
charge display will freeze. To resume call c harge updates, users must press
the Normal button.
Call CoverageCall Coverage provides automatic redirection of ca lls to alternate answering
positions in a Call Coverage path. Call Coverage allows you to:
■Establish coverage paths with up to 6 alternate answering positions
■Establish redirection criteria that govern when a call redirects
■Redirect calls to a local switch location
■Redirect calls to a remote (off-net) location
■Redirect calls based on time-of-day
■Allow users to change back and forth between two coverage choi ces (eit her
specific lead coverage paths or time-of-day tables). R efer to ‘‘Extended
User Administration of Redirected Calls’’ on page 1327 for more
information.
Hardware requirement
The Coverage of Calls Redirected Off-Net (CCRON) generally requires call
classification hardware. Both the Call Classifier - Detector and Tone Clock/Call
Classifier - Detector circuit packs provide tone detection ports including the
capability to do call classification. There are 8 ports on each circuit pack.