DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Managing phones
50Removing phones
3
3. Type list groups-of-extension 1234 and press RETURN.
The Extension Group Membership screen shows whether the ext ension is a
member of any groups on the system.
4. Press CANCEL.
5. If the extension belongs to a group, access the group screen and delete the
extension from that group.
For example, if extension 1234 belongs to pickup group 2, type change
pickup group 2 and delete the extension from the list.
6. Type list usage extension 1234 and press RETURN.
The Usage screen shows whether the extension is used in any vectors, has
any bridged appearances, or used as a controller.
7. Press CANCEL.
8. If the extension appears on the Usage screen, access the appropriate feature
screen and delete the extension.
For example, if extension 1234 is bridged onto extension 1235, type
change station 1235 and remove the appearances of 1234.
9. Type change station 1234 and press RETURN.
10. Delete any bridged appearances or personal abbreviated dialing ent ries and
press ENTER.
11. Type remove station 1234 and press RETURN.
The system displays the station screen for this phone so you can verify that
you are removing the correct phone.
Tip:
Be sure to record the port assignment for this jac k in case you want t o
use it again later.
12. If this is the correct phone, press ENTER.
If the system responds with an error message, the phone is busy or still
belongs to a group. Press CANCEL to stop the request, correct the problem,
and enter remove station 1234 again.
13. Remove the extension from voice mail service if the extension has a voice
mailbox.
14. Type save translations and press RETURN to save your changes.
Note that you do not need to delete the extension from cov erage pa ths. The s ystem
automatically adjusts coverage paths to eliminate the extension.