DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Enhancing system security
328Setting up security violations notification
11
2. In the Feature Button Assignments area, type verify.
3. Press ENTER to save your changes.
4. To activate the feature, press the VERIFY button on the phone and then enter
the Trunk Access Code and member number to be monitored.
Setting up security violations notification
This section shows you how to use Security Violations Notification (SVN) to set
security-related parameters and to receive noti fication when established limits are
exceeded. You can run reports related to invalid access attempts. You also can
disable a login ID or remote access authorization that is a ssociated with a security
violation.
When a security violation has occurred, there are steps that you can tak e t o be sure
that this same attempt is not successful in the fu ture. Refer to the BCS Products
Security Handbook for more information.
Before you start
If you are using ASG, on the System Parameters Customer-Options screen, verify
the Access Security Gateway (ASG) field is y. If not, contact your Lucent
representative.
Instructions
To set up security violations notification:
1. Type change system-parameters security and press RETURN.
The Security-Related System Parameters screen appears.