DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Screen reference
457AAR and ARS Digit Conversion Table
17
Location (for ARS only)
This is a display-only field. Values other than “all” appear only if the Multiple
Locations field on the System Parameters Customer Options is y.
Percent Full
Displays the percentage (0 to 100) of the system’s memory resources that have
been used by AAR/ARS. If the figure is close to 100%, you can free-up memory
resources.
Matching Pattern
Min
Max
Del
Valid display Usage
1 to 44 Defines the switch location for this ARS Digit Conversion Table.
all Indicates that this ARS Digit Conversion Ta ble is the default for
all port network (cabinet) locations.
Valid entries Usage
0 to 9
(1 to 18 digits)
Enter the number you want the switch to ma tch to dialed
numbers. If a Prefix Digit 1 is required for 10-digit direct
distance dialing (DDD) numbers, be sure the matching
pattern begins with a 1.
*, x, X wildcard characters
Valid entries Usage
1 to 24 Enter the minimum number of user-dialed digits the
system collects to match to this Matching Pattern.
Valid entries Usage
Min to 28 Enter the maximum number of user-dialed digits the
system collects to match to this Matching Pattern.
Valid entries Usage
0 to Max Enter the number of digits you want the system to delete
from the beginning of the dialed string.