DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Screen reference
587Data modules
17
TEI
Used with 7500 and World Class BRI Data Modules. Appears only if the Fixed
TEI field is y.
MIM Support
Used with 7500 Data Modules. Management Information Message Support. Used
to support two types of capabilities: MIM endpoint initialization capability (SPID
support), and other Maintenance/Management capability.
Country Protocol
Used with World Class BRI Data Modules. Enter the protocol that corresponds to
your supported initialization and codesets. The Country Protocol must match any
previously-administered endpoint on the same port. The following table lists the
valid protocol entries.
Endpt Init
Used with 7500 and World Class BRI Data Modules. Endpoint initialization is a
procedure, required for multipoint operation, by which User S erv ice Or der Pr of ile
(USOP) is associated with an endpoint on the ISDN-BRI. This association is
made via the Service Profile Identifier (SPID), administered into the system and
entered into the ISDN-BRI terminal. For a ISDN-BRI terminal to become
operational in a multipoint configuration, both the administered SPID and the
Valid entries Usage
0 - 63 Enter a 1- to 2-digit number.
Valid entries Usage
y/n Enter a 1- to 2-digit number.
Country/Area Protocol
Australia 2
ETSI (Europe) etsi
Japan 3
Singapore 6
United States (Bellcore National ISDN) 1