DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Routing outgoing calls
186Modifying call routing
8
In our example, for location 1 (Chicago) local HNPA calls:
■Type the appropriate digit in the Dialed String field
■Type 7 in the Total Min field
■Type 7 in the Total Max field
■Type 2 in the Route Pattern field
■Type hnpa in the Call Type field
In our example, for location 1 (Chicago) local service calls:
■Type the appropriate digits in the Dialed String field
■Type 3 in the Total Min field
■Type 3 in the Total Max field
■Type 1 in the Route Pattern field
■Type svcl in the Call Type field
3. Press ENTER to save your changes.
4. Type change ars analysis 4 location 2 and press ENTER.
The ARS Digit Analysis Table for location 2 appears.
5. Type in the local HNPA and service call routing information for New York.
6. Press ENTER to save your changes.
Related topics
Refer to ‘‘Automatic routing — general’’ on page 1167 for more in formation on
ARS.
Refer to ‘‘AAR and ARS Digit Analysis Table’’ on page 451, ‘‘AAR and ARS
Digit Conversion Table’’ on page 455, and ‘‘Tol l An aly si s’’ on page 964 for
general information on ARS administration. You can define location specific
entries in addition to the global entries on these screens.
Modifying call routing
If your system uses ARS Digit Analysis to analyze dialed strings and select the
best route for a call, you must change the digit analysis table to modify call
routing. For example, you’ll need to update this table to add new area codes or to
restrict users from calling specific areas or countries.