DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Handling incoming calls
143Setting up night service
7
5. In the EXT Alert Port (TAAS) field, type 01A0702.
This is the port address assigned to the external alerting device.
6. Press ENTER to save your changes.
The system is in Night Service.
Any calls to extension 2000 now go to extension 3000 (the guard’s desk).
Any “0” seeking calls go to extension 3000 (the guard’s desk).
To send LDN calls to the attendant during the day and to the TAAS bell at night:
1. Type change console-parameters and press RETURN.
The Console Parameters screen appears.
2. In the DID-LDN Only to Night Ext. field, type y.
This allows only listed directory number calls (LDN) to go to the listed
directory night service number extension.
3. In the Ext Alert Port (TAAS) field, type 01A070.
This is the port address assigned to the external alerting device.
4. Press ENTER to save your changes.
The system is in night service.
Any DNIS extension 2000 calls now go to the TAAS bell.
Any “0” seeking calls now go to the TAAS bell.
CONSOLE PARAMETERS
Attendant Group Name: Operator
COS: 0 COR: 0
Calls in Queue Warning: 5 Attendant Lockout? y
Ext Alert Port (TAAS): 01A0702
CAS: none
SAC Notification? n Night Service Act. Ext.:
IAS (Branch)? n IAS Tie Trunk Group No.:
IAS Att. Access Code: Alternate FRL Station:
Backup Alerting? n DID-LDN Only to LDN Night Ext? y
TIMING
Time Reminder on Hold (sec): 10 Return Call Timeout (sec): 10
Time in Queue Warning (sec):
INCOMING CALL REMINDERS
No Answer Timeout (sec): 20 Alerting (sec): 40
Secondary Alert on Held Reminder Calls? y
ABBREVIATED DIALING
List1: group 1 List2: List3:
COMMON SHARED EXTENSIONS
Starting Extension: Count: