Lucent Technologies 8.2 - page 1056

DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1 April 2000
Screen reference
1032Trunk Group
17
Type
This field specifies the signaling type to be used with TN760B (or later release),
TN722 (with any suffix), TN767, TN2140 (when the Trunk Signaling Type field
is cont), TN437, TN439, TN464 with any suffix, or TN458 circuit packs.
The Type column appears when the Trunk Signaling Type field is blank or cont.
The Type column does not display if the Trunk Signaling Type field is dis
!CAUTION:
Customers should not attempt to administer this field. Please contact your
Lucent representative for assistance.
Ans Delay
!CAUTION:
Customers should not attempt to administer this field. Please contact your
Lucent representative for assistance
This delay serves two purposes:
■It ensures that the answer supervision signal is valid and not a secondary
delay-dial or wink-start signal.
Valid entries Usage
t1 stan
t1 comp
t5rev The value of t5 rev is allowed only for the TN760D vint age 10
or later. When Type is t5 rev, Mode must be e&m.
type 5
Valid entries Usage
20 to 5100 in
increments of
20
Specifies the length of time (in ms) your switch will wait
before it sends answer supervision for inc oming calls on tie
trunks using the TN722A or later, TN760 (B, C, or D), TN767,
TN464 (any suffix), TN437, TN439, TN458, or TN2140 circuit
packs.
blank Same as setting the field to zero.