DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Screen reference
824Multifrequency-Signaling-Related System Parameters
17
Incoming Call Type
This field defines the signal type that a CO uses to place an incoming call to the
PBX.
ANI Prefix
This field appears only when Outgoing Call Type is group-ii-mfc or mfe.
Outgoing Call Type
This field defines the signal type that the PBX uses to place an outgoing call int o a
CO.
Valid entries Usage
group-ii-mfc If the value of this field is group-ii-mfc, the second page of the
screen will display entries for all group-I, group-II, group-A,
and group-B signal types with a set of default values (see page
2 of screen).
non-group-ii-
mfc If the value is non-group-ii-mfc, the second page displays
only group-I and group-A signal types.
mfe Use only in Spain (multi-frequency Espanol)
Valid entries Usage
1 to 6 digits Enter the prefix to apply to an extension when ANI is sent to the
CO.
Valid entries Usage
group-ii-mfc If the content of this field is group-ii-mfc, the system display s
the third page of the screen. The third page displays entries for all
group-I, group-II group-A, and group-B signal types with a set of
default values.
mfe Use only in Spain (multi-frequency Espanol)
none If the content of this field is none, the system does not display
the third page. In addition, Outgoing Forward Signal Present
Timer, Outgoing Forward Signal Absent Timer, ANI Prefix, ANI
for PBX, Next ANI Digits, and Collect All Digits Before Seizure
will not display on Field descriptions for page 1.