DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Managing trunks
359Inserting and absorbing digits
12
If you’re replacing trunk group 5 with another trunk group, just type the
information for the new trunk group over the old entries. Remember to
press ENTER to save your changes.
2. In the Station screen for extension 8410, clear the entry in the Button
Assignments field for the Trunk-Group Night Service button.
Remember to press ENTER to save your changes.
3. In the Trunk Group screen for trunk group 5, remove all member trunks
from the group.
Refer to ‘‘Removing trunks from a trunk group’’ on page 357 for
instructions.
4. Type remove trunk-group 5 and press ENTER.
The Trunk Group screen appears.
5. Press ENTER to remove the trunk group.
Inserting and absorbing digits
Use this procedure to modify the incoming digit string on DID and tie trunks by
inserting (adding) or absorbing (deleting) digits. You’ll need to do this if the
number of digits you receive doesn’t match your dial plan.
Instructions
As an example, let’s say you have a DID trunk group. It’ s group number is 5. Your
service provider can only send 4 digits, but your dial plan defines 5-digit
extensions beginning with 6:
1. Type change trunk-group 5 and press ENTER.
The Trunk Group screen appears.