DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Routing outgoing calls
188Modifying call routing
8
4. Move to a blank Dialed String field.
If the dialed string is already defined in your system, the cursor appears in
the appropriate Dialed String field, where you can make changes.
5. Enter 1650 in the Dialed String field.
6. Enter the minimum and maximum values from st ep 2 in the Total Mn and
Total Mx fields.
In our example, enter 11 in each field.
7. Enter the route pattern from step 2 in the Route Pattern field.
In our example, enter 30.
8. Enter fnpa in the Call Type field.
9. Enter the node number from step 2 in the Node Num field.
For our example, leave the node number blank.
10. Press ENTER to save your changes.
To add a new prefix, follow the same directions, except use a shorter dial string
(such as list ars route-chosen 2223333, where 222 is the old prefix) and a dial
type of hnpa.
Tip:
If you change an existing area code for a network wit h multipl e locatio ns, be
sure to change the Number Plan Area Code field on the Locations screen.
Refer to ‘‘Setting up multiple locations’’ on page 182.
ARS DIGIT ANALYSIS TABLE
Location: all Percent Full: 6
Dialed Total Route Call Node ANI
String Min Max Pattern Type Num Req
1____________________11 11 30 fnpa ___ n
167__________________11 11 30 fnpa ___ n
1800_________________11 11 30 fnpa ___ n
2___________________ 7 7 2 hnpa ___ n
3___________________ 7 7 2 hnpa ___ n
4___________________ 7 7 2 hnpa ___ n
5___________________ 7 7 2 hnpa ___ n
7___________________ 7 7 2 hnpa ___ n
8___________________ 7 7 2 hnpa ___ n
911_________________ 3 3 1 emer ___ n
976________________ _11 11 deny hnpa ___ n