DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Setting up telecommuting
296Installing home equipment
10
Before you start
You need the following equipment:
■DEFINITY extender remote module
■DCP sets (office and home must match)
Configure a feature access code for associating your home number to your office
number. For information about configuring an associate feature access code, refer
to ‘‘Setting up Personal Station Access’’ on page 287.
Instructions
Installing home equipment
To install your home equipment:
1. Plug the phone cord into the slot labeled line on the back of the module and
into the wall jack.
2. Plug the phone cord into the slot labeled port on the back of th e module an d
into the slot labeled line on the phone.
3. Plug the power cord into slot labeled power on the back of the module and
the wall socket.
The phone display Go Online appears.
4. Press 3 (Nxt).
The phone display Set Phone Number appears.
5. Press 2 (OK) to set the phone number.
6. Type 5551234 and press DROP.
This is the assigned analog phone number. In some areas, you may need to
include your area code (for example, 3035551234). The phone display Set
Phone Number appears.
7. Press 1(Prv).
This returns you to the Go Online phone display.
8. Press 2 (OK).
The module dials the number. When the modules connect, the phone
display Enter Password appears.
9. Type 0123456789 and press DROP.