DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Screen reference
877Security-Related System Parameters
17
Referral Destination
The referral destination receives the referral call when a security violation occurs.
The referral destination telephone must have a display, unless the you assign an
Announcement Extension.
Login (Barrier Code, Authorization Code
Security Code) Threshold
The value assigned to this field, in conjunction with Time Interval, determines
whether a security violation has occurred. For example, if this field is 5, and time
interval is 0:03, then five inv alid ac cess attemp ts within thre e minutes con stitutes a
security violation.
Time Interval
The value of this field, in conjunction with Threshold, determines whether a
security violation has occurred.
Valid entries Usage
An extension Enter the extension of the telephone, attendant console, or
vector directory number (VDN) that you want to receive the
referral call for each type of violation. This can be the same
extension for all type of violations.
If you use a VDN, you must complete the Announcement
Extension field. You can also use Call Vectoring Time-of-Day
routing to route the referral call to different destinations based
on the time of day or the day of the week.
Valid entries Usage
1–99, 1–255 for
Station Security
code
Enter the number of access attempts th at are permitted before a
referral call is made. In general, it is good to keep this number
low. If you are doing testing and do not want to generate
alarms, you might change this threshold temporarily.
Valid entries Usage
0:01 to 7:59 The range for the time interval is one minute to eight hours.
Entered in the screen “x:xx.” For example, if you want the time
interval to be one minute, you enter 0:01. If you want the time
interval to be seven and one-half hours, you enter 7:30.