DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Screen reference
928System Parameters Customer-Options
17
Duration (msec)
There is one dynamic Duration field associated with each of the 15 Tone
(Frequency/Level) fields on each screen page. Initially, when Tone is blank, this
field does not appear. However, when a non-blank value other than goto is entered
in a Tone field, the associated Duration field appear s, and must be use d to specify
the duration (in milliseconds) of the specified tone.
Step
There is one dynamic Step field associated with each of the 15 Tone
(Frequency/Level) fields shown on a screen page. Initially, when Tone is blank,
this field does not appear. However, when goto is entered in a Tone field, the
associated Step field appears, and must be used to specify the cadence step to
begin repeating from
System Parameters Customer-Options
This screen allows access to features purchased by customers. An authorized
Lucent Technologies representative sets these parameters for you.
Field descriptions for page 1
Screen 193. System Parameters Customer-Options
Valid entries Usage
50 through 12750 in
increments of 50 To describe the duration of each administered tone.
Valid entries Usage
Cadence Step (1–14) Beginning the repeated sequence for a “goto” entry.
Page 1 of 5
OPTIONAL FEATURES
G3 Version: V6 Maximum Ports: 300
Abbreviated Dialing Enhanced List? n CAS Main? n
Access Security Gateway? n Cvg Of Calls Redirected Off-net? n
Analog Trunk Incoming Call ID? n DCS (Basic)? n
A/D Grp/Sys List Dialing Start at 01? n DCS Call Coverage? n
Answer Supervision by Call Classifier? n DCS with Rerouting? n
ARS? y DEFINITY Network Admin? n
ARS/AAR Partitioning? y DS1 MSP? n
ASAI Interface? n
ASAI Proprietary Adjunct Links? n Emergency Access to Attendant? y
Page 1 of 5
OPTIONAL FEATURES
G3 Version: V8 Maximum Ports: 100
Location: 1 Maximum XMOBILE Stations: 0
Maximum H.323 Trunks: 0
Maximum H.323 Stations: 0
Maximum IP SoftPhones: 0