DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Screen reference
455AAR and ARS Digit Conversion Table
17
Node Number
ANI Reqd
AAR and ARS Digit Conversion Table
Your system uses the AAR or ARS Digit Conversion Table to change a dialed
number for more efficient routing. Digits may be inserted or deleted from the
dialed number. For instance, you can tell the switch to delet e a 1 and an ar ea code
on calls to one of your locations, and avoid long-distance charges by routing the
call over your private network.
lpvt local private normal
natl non-NANP normal
npvt national private normal
nsvc national service normal
op operator attendant
pubu public-network number (E.164)-unknown normal
svcl national(2) toll-auto
svct national(2) normal
Valid entries Usage
1 to 999 Enter the number of the destination node in a private
network if you are using node number routing or DCS. If
you complete this field, leave the Route Inde x field blank.
Valid entries Usage
y/n Enter y if ANI is required on incoming R2-MFC or Russian MF
ANI calls. This field applies only if the Request Incoming ANI
(non-AAR/ARS) field on the Multifrequency-Signaling-Related
System Parameters screen is n.
rAllowed only if “Allow ANI Restriction on AAR/ARS is y on
Feature Related System Parameters” screen. Use to drop a call
on a Russian Shuttle trunk or Russian Rotary trunk if the ANI
request fails. Other types of trunks treat r as y.
Valid
entries Usage China # 1
Call Type