DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Managing trunks
360Inserting and absorbing digits
12
2. In the Digit Treatment field, type insertion.
This field tells the switch to add digits to the incoming digit string. These
digits are always added at the beginning of the string.
3. In the Digits field, type 6.
For insertion, this field defines the specific digits to insert. The switch will
add a “6” to the front of the digit strings delivered wi th in coming calls. For
example, if the central office delivers the string “4444,” DEFINITY ECS
will change it to “64444,” an extension that fits your dial plan.
4. In the Expected Digits field, type 4.
This field tells the switch how many digits the central office sends.
NOTE:
The Expected digits field doesn’t appear on the screen for tie trunk
groups.
5. Press ENTER to save your changes.
If your service provider sends 7 digits but you only need 5, you ne ed to ab sor b the
first 2 digits in the digit string. To absorb digits:
1. Type change trunk-group 5 and press ENTER.
The Trunk Group screen appears.
2. In the Digit Treatment field, type absorption.
This field tells the switch to remove digits from th e incoming digit string.
These digits are always removed from the beginning of the string.
3. In the Digits field, type 2.
TRUNK GROUP
Group Number: 5 Group Type: did CDR Reports: y
Group Name: Incoming calls COR: 85 TN: 1 TAC: 105
Country: 1 Auth Code? n
TRUNK PARAMETERS
Trunk Type: wink-start Incoming Rotary Timeout(sec): 5
Incoming Dial Type: tone
Trunk Termination: rc Disconnect Timing(msec): 500
Digit Treatment: insertion Digits: 6
Expected Digits: 4 Sig Bit Inversion: none
Extended Loop Range? n Trunk Gain: high Drop Treatment: silence
Disconnect Supervision - In? y