Command reference
1041
18
DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
18
Command reference
Use the commands in the tables below to access each administration screen.
Brackets [ ] indicate the qualifier is optional. Single quotes (‘ ’) indicate the text
inside the quote must be entered exactly as shown or an abbreviated form of the
word may be entered. MAX is the maximum number available in your system
configuration.
AAR and ARS Digit Analysis Table
Action Object Qualifier
change aar analysis
ars analysis Enter digits between 0 to 9, ‘x’ or ‘X’ (dialed
string) [‘part’ 1-8] [‘min’(1-MAX)]
display aar analysis
ars analysis Enter digits between 0 to 9, ‘x’ or ‘X’ (dialed
string) [‘part’ 1-8] [‘min’ (1-MAX)] [’print ’ or
’schedule’]
list aar analysis
ars analysis [‘start’ string] [‘count’ 1-MAX]
[‘route’(1-MAX or r1-r32)], [‘part’ (1-8)] ,
[‘node’ (1-MAX)], [‘to-node’ (1-MAX),
[‘print’ or ’schedule’]
list aar route-chosen
ars route-chosen Enter dialed number, [‘partition’ (1-8)], [’print’
or ’schedule’]