DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
System basics
4Logging off the system
1
Instructions
To log into the system with ASG:
1. Enter your login ID and press RETURN.
The system displays the challenge number (for example, 555-1234) and
system Product ID number (for example, 1000000000). The Product ID
provides Lucent Services with the specific DEFINITY ECS system
identifier.
2. Press ON to turn on your Access Security Gateway Key.
3. Type your PIN and press ON.
The Access Security Gateway Key displays a challenge prompt.
4. At the challenge prompt on the Access Security Gateway Key, type the
challenge number without the “-” character (for example, 5551234) from
your screen and press ON.
The Access Security Gateway Key displays a response number (for
example, 999-1234).
5. At the response prompt on your terminal, type the ASG response number
without the “-” character (for example, 9991234) and press RETURN.
The Command prompt appears.
NOTE:
If you make 3 invalid login attempts, the system terminat es the
session. For more information, refer to the ap propriate maintenance
book for your system.
Fixing problems
When logging in failures occur, if you are a super-user, you can use the list
asg-history command to determine the cause. The asg history log contains the last
100 or 250 records depending on your system. This log contains the d ate and t ime,
the port mnemonic, the login ID entered (correct or incorrect), and the status for
each session attempt. For specific information about the ASG history log, refer to
DEFINITY ECS Reports.
Logging off the system
For security, log off any time you leave your terminal. If you use terminal
emulation software to administer the swi tch, log off the system and exit the
emulation application before switching to another software package.