DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Screen reference
746ISDN trunk group
17
Calling Number – Delete
Calling Number – Insert
Calling Number – Numbering Format
This field indicates the TON/NPI encoding applied to CPN information modified
by the CLI Prefix feature. This encoding does not apply to calls originating
locally. The Numbering Format field on page 2 of this screen applies to calls
originated from this switch.
If this field is blank, DEFINITY ECS passes on the encoding received in the
incoming setup message. If the incoming s etup message did not contain CPN
information and digits are added, the outgoing message will contain these digits.
If the Numbering Format field is blank in this case, the value defaults to pub- unk.
If the Numbering Format field on page 2 of this screen is also administered as
unknown, the trunk group is modified to “unk-unk” encoding of the TON/NPI.
Therefore, this field also must contain a value other than unknown.
NOTE:
The values for this field map to the Type of Numbering (TON) and
Numbering Plan Identifier (NPI) values shown below.
Valid entries Usage
1 to 15 Enter the number of digits, if any, to dele te from the calling
party number for all incoming calls on this trunk group.
all
blank
Valid entries Usage
1 to 15 Enter the specific digits, if any, to add to the beginning of the
digit string of incoming calls when the calling party is a
member of this trunk group.
blank
Valid entries Type of numbering
(TON) Numbering plan identifier (NPI)
blank incoming TON
unmodified incoming NPI unmodified
natl-pub national(2) E.164(1)
intl-pub international(1) E.164(1)
locl-pub local/subscriber(4) E.164(1)
pub-unk unknown(0) E.164(1)