Lucent Technologies 8.2

DEFINITY ECS Release 8.2

Administrator’s Guide

555-233-506 Issue 1

April 2000

Screen reference

873Route Pattern

subaddress information element (IE). At the receiving end, the call terminates to

the user indicated by the subaddress number instead of the attendant.

Administrable when, on the System-Param eters Customer-Option screen, the

ISDN Feature Plus field is y.

Numbering Format

This field applies only to ISDN trunk groups. Enter a value from table below. This

field specifies the format of the routing number used for the trunk group for this

preference.

This field appears when the ISDN-PRI or ISDN-BRI Trunks field is y on the

System-Parameters Customer-Options screen.

NOTE:

To access Bellcore NI-2 Operator Service Access, the Inserted Digits field

must be unk-unk.

Valid entries Usage

1 - 5

blank

Enter the number of dialed digits to send in the calling party

subaddress IE.

Valid entries Numbering Plan Identifier Type of Numbering

blank E.164(1) 1-MAX

natl-pub E.164(1) national(2)

intl-pub E.164(1) international(1)

locl-pub E.164(1) local/subscriber(4)

pub-unk E.164(1) unknown(0)

lev0-pvt Private Numbering Plan - PNP(9) local(4)

lev1-pvt Private Numbering Plan - PNP(9) Regional Level 1(2)

lev2-pvt Private Numbering Plan - PNP(9) Regional Level 2(1)

unk-unk unknown(0) unknown(0)