DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Managing group communication
379Setting up chime paging over loudspeakers
14
Instructions
To set up chime paging, you fill out the necessary fields on the Loudspeaker
Paging screen and then assign chime codes to individual extensions on the Code
Calling IDs screen.
As an example, let’s set up chime paging for a clothing store with 3 zones. We’ll
allow users to page all zones at once, and we’ll assign a class of re st ri ct ion of 1 to
all zones.
1. Type change paging loudspeaker and press RETURN.
The Loudspeaker Paging screen appears.
2. In the Code Calling Playing Cycles field, type 2.
This field sets the number of times a chime code plays when someone
places a page.
3. In the Port field for Zone 1, type 01A0301.
Use this field to assign a port on an auxiliary trunk circuit pack to this zone.
4. In the Code Calling — TAC field type 80.
Use this field to assign the trunk access code users dial to page this zone.
You cannot assign the same trunk access code to more than one zone.
5. In the Code Calling — COR field type 1.
Use this field to assign a class of restriction to this zone. You can assign
different classes of restriction to different zones.
LOUDSPEAKER PAGING
CDR? y
Voice Paging Timeout (sec):
Code Calling Playing Cycles: 2
PAGING PORT ASSIGNMENTS
Voice Paging Code Calling
Zone Port TAC COR TN TAC COR TN Location:
1: 01A0301 1 80 1 1 Men’s Department
2: 01A0302 1 81 1 1 Women’s Department
3: 01A0303 1 82 1 1 Children’s
4: 1 1
5: 1 1
6: 1 1
7: 1 1
8: 1 1
9: 1 1
ALL: 1 89 1 1