DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Screen reference
972Trunk Group
17
Tip:
Remember that facility restriction levels (FRL) are assigned to classes of
restriction. Even if 2 trunk groups have classes of restriction that allow a
connection, different facility restriction levels may prevent operations such
as off-net call forwarding or outgoing calls by remote access users.
TN
Tip:
Double-check your entry. If you accidentally enter an unassigned tenant
partition number, the system will accept the entry but no calls will go to the
trunk group.
TAC
Enter the trunk access code (TA C) that must be diale d to access the trunk group. A
different TAC must be assigned to each trunk group. CDR reports use the TAC to
identify each trunk group.
CO Type
This field appears when the Country field is 14 and is used only by trunk group
members administered on a TN464D vintage 2 or later DS1 circuit pack.
Valid entries Usage
1 to 20
(G3si/csi) Enter a Tenant Partition number to assign this trunk group to
the partition.
1 to 100 (G3r)
Valid entries Usage
1-4 digit
number Enter any number that fits the format for trunk access codes or
dial access codes defined in your dial plan.
*, # * and # may be used as the first character in a TAC.
Valid entries Usage
analog This field specifies whether the trunk group is connected to
analog or digital facilities at the central office.
digital