DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Screen reference
779ISDN-BRI Trunk Circuit Pack
17
T3 Timer Length (sec)
Port
This is a display-only field. It shows the port number to which parameters
administered on the row apply.
Interface
Side
Cntry/Peer Protocol
Tells call processing software which ISDN protocol standard is applied.
Valid entries Usage
1 to 127 Tells the TE side how long to wait, in seconds, for an inactive
Layer 1 to become active.
Valid entries Usage
network Tells call processing software whether a particular port is
connected to a user/network or a peer interface. These entries
are valid for the TN2185. You c an enter peer-slave only if the
QSIG Basic Call Setup feature is enabled
user
peer-master
peer-slave
Valid entries Usage
a Determines how glare conditions are handled when Interface
field is peer-slave.
b
Valid entries Usage
1 to 25 When this field is 10, 12, 13, or etsi, the Protocol Version
field is equivalent to b on the DS1 circuit pack screen. When
the Cntry/Peer Protocol field is set 10, 12, 13, or etsi, set the
Provol Version field to b. For all other administered values,
the Protocol Version sets to
a.
etsi
QSIG When the Interface field is peer-slave or peer-master, this
field must be QSIG. The choice QSIG is valid only when the
Interface field is peer-slave.
blank You cannot leave this field blank if the Interface field is set to
a valid, non-blank value