DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Screen reference
511CDR System Parameters
17
Secondary Output Format
Controls the format of the call records sent to the secondary output device.
!CAUTION:
Only qualified (Lucent Technologies) service personnel should administer a
secondary output device. This option may cause loss of data when the b u ffer
contains large amounts of data.
Secondary Output Extension
Appears when the secondary output format is administered.
Use ISDN Layouts
ISDN Layouts provide more accurate information about the inter-exchange carr ier
and ISDN network services used for a call. This affects "lsu" and "printer" output
formats, as well as any format with ISDN layouts, such as “teleseer.”
Valid entries Usage
lsu
unformatted
int-direct
int-process
These are the only formats you can use for a secondary output
device. The format must be compatible with your call
accounting software. Verify this through your vendor or the
accounting system documentation.
Valid entries Usage
eia Use this if the secondary output device is connected to the
eia port. This is not a valid option on G3r systems.
Extension number Thi s is the extensi on of the data module (i f used) that li nks
the secondary output device to the switch.
Valid entries Usage
y/n Enter y to enable the use of the ISDN version of the specified
primary output format. You cannot use ISDN formats and
Enhanced formats at the same time.