DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Screen reference
606DS1 Circuit Pack
17
either end of the DS1 link must have complementary settings in this field: if not,
the D-channel won’t even come up. For example, if the switch at one end of the
link is administered as network, the other must be administered as user.
Interconnect
For E-1 service using channel-associated signaling, the entry in this field tells
DEFINITY ECS whether the DS1 circuit pack is using a public or private ne twork
protocol. The entry in this field must agree with the entry in the Group Type field
on the Trunk Group screen. This field appears only when the Signaling Mode field
is CAS.
Country Protocol
The entry in this field must match the country protocol used by the far-end switch.
For connections to a public network, your network service provider can tell you
which country protocol they are using.
Valid entries Usage
Use the following 2 values for private net work applications in the U.S.
network Enter network if your switch overrides the other end when
glare occurs. If you are connecting your switch to a host
computer, set this field to network.
user Enter user if your switch releases the contested circuit and
looks for another when glare occurs. If you are connecting your
switch to a public network, set this field to user.
Use the following values for private networks (including QSIG networks)
outside the U.S. Entering either of these values causes the Peer Protocol and Side
fields to appear.
peer-master Enter peer-master if your switch overrides the other end when
glare occurs.
peer-slave Enter peer-slave if your switch releases the contested circuit
and looks for another when glare occurs.
Valid entries Usage
pbx If pbx is selected, the board operates as a tie trunk circuit pack.
CO If CO is selected, the board operates as a CO or DID circuit
pack.