DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Screen reference
828Multifrequency-Signaling-Related System Parameters
17
Private Group II Permissions and Public
Interworking
Convert First Digit End-of-ANI To
Collect All Digits Before Seizure
This field appears only when Outgoing Call Type is group-ii-mfc or mfe.
Request Incoming ANI (non-AAR/ARS)
This field only applies if the incoming call via the R2-MFC trunk is term inating t o
a local station on this PBX.
Valid entries Usage
y/n If y, DEFINITY ECS:
—Sends the category for MFC ANI for the COR of the
originating party for non-private-MFC-trunk to
MFC-private-trunk calls.
—Send s the Group II category received over the incoming
private trunk as the outgoing Group II category on tandem
private MFC calls.
—Applies MFC group II-CPC termination restrictions on
incoming MFC private trunk calls.
—Checks station permissions if you call forward off-net.
Valid entries Usage
0 to 9 Enter the digit used when the incoming init ial end-of-ani or
end-of-dial MF signal is converted on a per-switch basis.
Valid entries Usage
yThe system collects all the digits before se izing the trunk and
the ANI Req field on the AAR and ARS Digit Conversion
Table does not apply.
n Enter n to control ANI collection via the ARS screens.
Valid entries Usage
y/n If y, ANI should be requested on incoming R2-MFC calls.