Lucent Technologies 8.2

DEFINITY ECS Release 8.2

Administrator’s Guide

555-233-506 Issue 1

April 2000

Screen reference

573Data modules

Hot Line Destination — Abbreviated Dialing Dial

Code

Used with 7500, Data Line, Netcon, Processor/Trunk, Processor Interface, and

World Class BRI Data Modules. Appears only when the Special Dialing Option

field is hot-line. Entry in this field supports Data Hot Line.

Default Dialing Abbreviated Dialing Dial Code

Only appears when the Special Dialing Option field is default. When the user

goes off-hook and enters a carriage return following the DIAL prompt , the s ystem

dials the AD number. The data call originator can also perform data-terminal

dialing by specifying a dial string that may or may not contain alphanumeric

names.

CIRCUIT SWITCHED DATA ATTRIBUTES

Used with 7500 and World Class BRI Data Modules.

NOTE:

These fields represent defaults needed for modem pooling con v ersion

resource insertion when the endpoint does not support data query

capability and administered connections. These fields have no

significance for data modules providing data query [all Lucent

Technologies-supported ISDN-BRI data modules (7500 and ADM)].

For Lucent Technologies ISDN-BRI or World Class ISDN-BRI data

modules, use the default settings.

Default Duplex

Used with 7500 and World Class BRI Data Modules. Used to identify the duplex

mode.

Valid entries Usage

0-999 This number is associated with the AD List. When the user

goes off-hook on a Data Hot Line call, the system dials the AD

number.

Valid entries Usage

0-999 Enter a list number associated with the abbreviated di a ling list.

Valid entries Usage

full Allows simultaneous two-way transmission.

half Allows only one transmission direction at a time.