DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Screen reference
569Data modules
17
Enable Link
Used with X.25, Ethernet, Point-to-Point, and Processor Interface data modules.
Refer to DEFINITY ECS Administration for Network Connectivity for more
information. This field is in different locations on the screen for different data
module types.
Node Name
Used with Ethernet and Point-to-Point data modules. Refer to DEFINITY ECS
Administration for Network Connectivity for more information.
Subnet Mask
Used with Ethernet data modules. Refer to DEFINITY ECS Administration for
Network Connectivity for more information.
Broadcast Address
Used with Ethernet data modules. Refer to DEFINITY ECS Administration for
Network Connectivity for more information.
Network uses 1’s for Broadcast Addresses
Used with Ethernet data modules. Refer to DEFINITY ECS Administration for
Network Connectivity for more information.
IP Address Negotiation
Used with Point-to-Point data modules. Refer to DEFINITY ECS Administration
for Network Connectivity for more information.
PDATA Port
Used with System Port Data Modules. Enter a seven-digit alphanumeric port
location to which the data module is connected. Used to relate the physical
PDATA port to which the mode 3 portion of the system port is connected. This
entry must be assigned to a port on a PDATA Line Board.
Valid entries Usage
01 through 22 First and second characters are the cabinet number
A through EThird character is the carrier
01 through 20 Fourth and fifth characters are the slot number in the carrier
01 through 12 Sixth and seventh characters are the circuit number