DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Managing trunks
346Adding a PCOL trunk group
12
Before you start
Before you can administer any trunk group, you must have one or more circuit
packs of the correct type with enough open ports to handle the number of trunks
you need to add. To find out what circuit packs you need, refer to the DEFINITY
ECS System Description.
Instructions
As an example, let’s set up a new PCOL group and administer the group as a CO
trunk for two-way voice traffic.
To add the new PCOL group:
1. Type add personal-co-line next and press ENTER.
The Personal CO Line Group screen appears.
2. In the Group Type field, type co.
This field specifies the kind of trunk group you’re creating. PCOL groups
can be administered as CO, FX, or WATS trunks.
3. In the Group Name field, type Outside calls.
This name will be displayed, along with the group number, for outgoing
calls if you set the Outgoing Display? field to y. You can type any name up
to 27 characters long in this field. (You may want to put the phone number
here that’s assigned to this trunk.)
Page 1 of X
PERSONAL CO LINE GROUP
Group Number: 1 Group Type: co CDR Reports: y
Group Name: OUTSIDE CALL TAC: ____
Security Code: ___ Coverage Path: ____ Data Restriction? _
Outgoing Display? _
TRUNK PARAMETERS Trunk Type: ground-start Trunk Direction: two-way
Trunk Port: 01D1901_ Disconnect Timing(msec): 500
Trunk Name: __________ Trunk Termination: rc____
Outgoing Dial Type: tone_____ Analog Loss Group: 7
Prefix-1? y Digital Loss Group: _
Answer Supervision Timeout: ___ Receive Answer Supervision? _
Trunk Gain: high Country: 1
Charge Conversion: 1____
Decimal Point: none__
Currency Symbol: ___
Charge Type: units__