DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Screen reference
825Multifrequency-Signaling-Related System Parameters
17
ANI for PBX
This field appears only when Outgoing Call Type is group-ii-mfc or mfe.
MFE Type
This field only appears when Incoming Call Type is mfe and the Outgoing Call
Type is mfe or none.
Maintenance Call Type
Next ANI Digit
This field appears when Outgoing Call Type is group-ii-mfc.
Valid entries Usage
2 to 15 Enter the PBX identification number that is sent to the CO when
ANI is requested (by the CO) on a particular call but is not
available, such as on tandem tie trunk calls.
blank Use for tandeming. If this field is blank, you must enter a value in
the ANI-Not-Available field.
Valid entries Usage
2/5 Determines which public signaling the sw it ch will use.
2/6
Valid entries Usage
1The Belgium maintenance sequence is indicated when the CO
sends an MFC maintenance tone.
2The Saudi Arabian sequence is indicated when the CO sends an
MFC maintenance tone.
Valid entries Usage
next-digit
next_ani_digit
send-ani
Enter a value to determine whether the Next ANI D ig it signal
will be the same as the “send-ani” signal or the “next-digit”
signal or another signal defined as “next_ani_digit.”