DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
System basics
15Saving translations
1
Fixing problems
NOTE:
You cannot see whether the translation ID on the flash card corresponds to
the number on the Processor circuit packs. However, if the numbers do not
match, the system issues an error message when you attempt a save
translation operation.
When failures occur, the system responds with the following error codes.
For more information about error messages and how to correct them, refer to the
maintenance book for your system.
Related topics
Refer to your maintenance book for information about backing up or restoring
your system.
Refer to ‘‘Saving announcements’’ on page 369 for information about backing up
announcements for your system.
Refer to ‘‘Restoring announcements’’ on page 371 for information about restoring
announcements to your system.
Problem Possible causes Solution
1 Save translation cannot write
to the active drive. Repeat the save translation
process for the active drive.
2 Save translation cannot write
to the standby drive. Repeat the save translation
process for the standby drive.