DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Screen reference
818Modem Pool Group
17
Screen 163. Modem Pool Group — Combined screen if Group Type is combined
Group Number
A display-only field when the screen is accessed using an administration
command such as add or change.
Group Type
This field designates what physical model pool you are going to.
Receiver Responds to Remote Loop
This field appears only when the Group Type field is integrated.
Valid entries Usage
integrated Maps to the Pooled Modem circuit pack.
combined Maps to an external modem pool (when you have a data
module and a modem).
Valid entries Usage
y/n Enter y to allow the far-end modem to put conversion resource
into loop back mode.
change modem-pool num Page 1 of 1
MODEM POOL GROUP
Group Number: _ Group Type: combined
Modem Name: ______ Hold Time (min): 5_
Time Delay: 0_ Direction: two-way
Answer Supervision Timeout(sec): _
Speed: LOW/300/1200___ Duplex: full Synchronization: async
PORT PAIR ASSIGNMENTS
Analog Digital Analog Digital Analog Digital Analog Digital
1: _____ _____ 9: _____ _____ 17: _____ ______ 25: _____ _____
2: _____ _____ 10: _____ _____ 18: _____ ______ 26: _____ _____
3: _____ _____ 11: _____ _____ 19: _____ ______ 27: _____ _____
4: _____ _____ 12: _____ _____ 20: _____ ______ 28: _____ _____
5: _____ _____ 13: _____ _____ 21: _____ ______ 29: _____ _____
6: _____ _____ 14: _____ _____ 22: _____ ______ 30: _____ _____
7: _____ _____ 15: _____ _____ 23: _____ ______ 31: _____ _____
8: _____ _____ 16: _____ _____ 24: _____ ______ 32: _____ _____