DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Screen reference
564Data modules
17
COS
Enter the desired class of service.
Remote Loop-Around Test
Used with Processor/Trunk and X.25 Data Modules. Appears when the T ype f ie ld
is pdm, tdm, or x.25.
Maintenance Extension
Used with Netcon and Processor Interface Data Modules.
x.25 Assigns an X.25 Data Module in G3r configurations for
communications to Adjuncts and other nodes in a DCS
network. Refer to DEFINITY ECS Administration for Network
Connectivity for more information on X.25 data modules.
Valid entries Usage
0 - 15 Select the allowed features.
Valid entries Usage
y/n For Processor/Trunk Data Modules, enter y if the data module
supports a loop-back test at the EIA interface. In general,
Lucent Technologies equipment supports this test but it is not
required by Level 2 Digital Communications Protocol. Enter n
to abort a request for this test.
y/n For X.25 Data Modules, enter y to allow remote loop-around
tests on this port. Refer to the DEFINITY Enterprise
Communications Server Maintenance manual for more
information about remote loop-around tests. Enter n to abort a
request for this test.
Valid entries Usage
Enter the extension number required to
perform maintenance functions on the
standby netcon physical channel in a
duplicated system.
The standby remote loop around
tests fails if this field is not
administered.
Valid entries Usage