DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Managing phone features
85Setting up bridged call appearances
4
4. Press NEXT PAGE until Per Button Ring Control appears (digital sets only).
■If you want to assign ringing separately to each bridged appearance,
type y.
■If you want all bridged appearances to either ring or not ring, leave
the default n.
5. Move to Bridge Call Alerting.
If you want the bridged appearance to ring when a call arrives at the
primary phone, type y. Otherwise, leave the default n.
6. Complete the appropriate field for your phone type.
7. Press RETURN.
Btn and Ext fields appear. If Per Button Ring Control is set to y on the
digital screen, Btn, Ext, and Ring fields appear.
Station screen (analog set)
If. . . Then. . .
your primary phone is analog move to the Line Appearance field and
enter abrdg-appr
your primary phone is digital move to the Button Assignments field
and enter brdg-appr
STATION
SITE DATA
Room: _______ Headset? n
Jack: _______ Speaker? n
Cable: _______ Mounting? d
Floor: _______ Cord Length: 0
Building: _______ Set Color: ______
ABBREVIATED DIALING
List1: ___________ List2: _________ List3: _________
HOT LINE DESTINATION
Abbreviated Dialing List Number (From above 1, 2 or 3):
Dial Code:
Line Appearance: brdg-appr Btn: Ext: