DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Screen reference
1010Trunk Group
17
Field descriptions for page 3
The figure below shows a common configuration for page 3 of the Trunk Group
screen when the Group Type field is co. This screen is only an example, and the
fields shown below may change or disappear according to specific field settings.
Screen 212. Administrable Timers for Trunk Group
!CAUTION:
Customers: Do not change fields on this page withou t assistance from
Lucent Technologies or your network service provider.
Send Incoming/Outgoing Disconnect Timers to
TN465 Ports
The field appears only for a co, fx, or wats trunk group.
Valid entries Usage
y/n Enter y if you want to send the incoming disconnect and
outgoing disconnect timer values to the trunk group ports that
are on a TN465 board.
add trunk-group next Page 3 of x
ADMINISTRABLE TIMERS
Send Incoming/Outgoing Disconnect Timers to TN465 Ports? _
Outgoing Dial Guard(msec): _____
Incoming Glare Guard(msec): _____ Outgoing Glare Guard(msec): _____
Outgoing Rotary Dial Interdigit (msec): ____
Ringing Monitor(msec): _____ Incoming Seizure(msec): ____
Outgoing End of Dial(sec): ___ Outgoing Seizure Response(sec): ___
Programmed Dial Pause(msec): _____ Disconnect Signal Error(sec): ___
Flash Length(msec): ____
END TO END SIGNALING
Tone (msec): ____ Pause (msec): 150
OUTPULSING INFORMATION
PPS: 10 Make(msec): 40 Break(msec): 60 PPM? y Frequency: 50/12k