DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Managing displays
111Displaying ICLID Information
6
Before you start
Be sure Analog Trunk Incoming Call ID field is set to y on the System-P arameter s
Customer-Options screen.
Refer to the DEFINITY ECS System Description for information on the required
circuit pack.
Instructions
Let’s set up the analog diod trunk group 1 to receiv e call ing par ty info rmatio n and
display the calling party number on the phone of the person called.
1. Type change trunk group 1.
The Trunk Group screen for trunk group 1 appears. The Gro up Type field is
already set to diod.
2. Press NEXT PAGE to display the Trunk Features page.
3. Type Bellcore in the Receive Analog Incoming Call ID field.
4. Press NEXT PAGE to display the Administrable Timers section.
5. Type 120 in the Incoming Seizure (msec) field.
6. Press ENTER to save your changes.
change trunk-group 1 Page 2 of x
TRUNK GROUP
TRUNK FEATURES
ACA Assignment? n Measured: none Maintenance Tests? y
Data Restriction? n
Suppress # Outpulsing? n Receive Analog Incoming Call ID: Bellcore
Incoming Tone (DTMF) ANI: no
change trunk-group 1 Page 3 of x
TRUNK GROUP
ADMINISTRABLE TIMERS
Incoming Disconnect(msec): 500
Incoming Dial Guard(msec): 70
Incoming Seizure(msec): 120
Flash Length(msec): 540 Incoming Incomplete Dial Alarm (sec): 255
END TO END SIGNALING
Tone (msec): 350 Pause (msec): 150