DEFINITY ECS Release 8.2
Administrator’s Guide
555-233-506 Issue 1
April 2000
Screen reference
920System Parameters Country-Options
17
Companding Mode
Identifies the companding algorithm to be used by system hardware.
Base Tone Generation Set
The country code identifies the base tone generation set to be used. This field is
meaningful only if the system tone detector is a TN780, vintage 4 or a TN2182.
A TN780 vintage 5 or greater or a TN2182 is required if Belgian Tones (Country
code 8) are specified.
440Hz PBX-dial Tone
Specifies whether the switch (primary) dial tone will be changed to a continuous
440Hz/-17 tone.
440Hz Secondary-dial Tone
Specifies whether the Secondary (CO) dial tone will be changed to a continuous
440Hz/-17 tone.
Valid entries Usage
A-law Generally used outside the US
Mu-law Generally used in the US
Valid entries Usage
1–25 Refer to the Country code table at the beginning of this screen
description.
Valid entries Usage
y/n A value of n implies the tone will either be administered on a
later page of this screen or, if no individual definition is
administered, as defined in Base Tone Generation Set.
Valid entries Usage
y/n A value of n implies the tone will either be administered on a
later page of this screen or, if no individual definition is
administered, as defined in Base Tone Generation Set.