OAM | Operations Administration and Management |
PIA | PPPoE Intermediate Agent |
RMON | Remote Monitoring |
STP | Spanning Tree Protocol |
SNTP | Simple Network Time Protocol |
SVL | Shared VLAN Learning |
SVM | Shared VLAN for Multicast |
Specific Agent | Entities that use GenAg interfaces to manage the system |
TEA | Target Engine Agent |
VC | Virtual Channel |
VLAN | Virtual LAN |
CLI Command - Action List
<action> | Description | |
|
| |
alias | Used to create an alias for any CLI command. | |
apply | Used to apply a configuration file stored on the system | |
climode | Modes of cli/Prio change of CLI task | |
commit | Used to commit the active configuration to the flash. | |
Create | Used to create configuration of objects corresponding to the identifier and parameters. | |
delete | Used to delete configuration of objects corresponding to the identifier and parameters. | |
If the delete action is confirmed, the configuration of objects will no longer exist. | ||
| ||
defragment | Defragment the compact blocks in flash | |
download | Used to download a binary, configuration or user specific file from theremote host. | |
get | Used to view information of the selected identifier and parameters. | |
help | Used to view the detailed usage of CLI commands. | |
list | Used to list the Configuration or binary files stored on the unit | |
logout | Used to terminate the CLI. | |
memset | Specify the length of memory set | |
modify | Used to set or modify existing configuration of objects corresponding to the identifier | |
and parameters. | ||
| ||
passwd | Used to change the password associated with a user login. | |
permission | Use this command to change the permission of the files stored on flash | |
Ping | Used to send one or more ICMP messages to another host for a reply. | |
prompt | Used to set the new CLI prompt. | |
rdf | Used to read Flash | |
rdm | Used to read Memory | |
reboot | Used to restart the system. | |
remove | Used to remove a configuration or binary file stored on the unit | |
reset | Used to reset a port of system. | |
save | Used to save the configuration to Flash RAM. | |
Sync | Used to Sync | |
traceroute | Used to trace the route to the specified destination. | |
unalias | Used to delete an alias. | |
upgrade | Used to upgrade a configuration or binary file stored on the system. | |
verbose | Using this command, a user can view the status of entries before and after the | |
execution of a command (create, delete, modify, get). | ||
| ||
wrm | Used to write Memory |
108 | IDL series User Guide |
|
|