interface as the management vlan id. In case the management vlan

 

(virtual vlan mapped to S-VLAN and C-VLAN for the frame) doesn't

 

exist (ie. Virtual vlan mapped to 'mgmtsvlanid' or the associated '

 

psvlanid ', if 'mgmtsvlanid' is zero) on the system then IP based

 

management shall not happen on the interface till the corresponding

 

virtual-VLAN is created with the Net side port as its member.

 

 

Tagged Mgmt PDU Prio

Priority to be set in Tagged Ethernet PDUs sent on Management

 

VLAN over this interface. This field is valid only if either 'ip' field is

 

non-zero or 'usedhcp' field is true. In Native Vlan mode this priority

 

shall be used for C-Vlan tag while in stacked vlan mode it shall be

 

used for S-Vlan tag.

 

 

Oper Status

The actual/current state of the interface. It can be either up or down.

 

 

Admin Status

The desired state of the interface. It may be either Up or Down.

 

 

Cautions:

zIf an aggregator interface is being created, all configurations of aggregated links (layer2 Ethernet interfaces), should be same.

5.4.3LACP Aggr Commands5.4.3.1 Get lacp aggr

Description:

Use this command to get.

Command Syntax:

gets lacp aggr [aggrifname <aggrifname-val >]5.4.3.2 Create lacp aggr

Description:

Use this command to create.

Command Syntax:

create lacp aggr aggrifname <aggrifname-val> [actorsystemprio <actorsystemprio-val>] [actoradminkey <actoradminkey-val>] [collectormaxdelay <collectormaxdelay-val>] [aggrtype Static Lacp]

138

IDL series User Guide