5.5 ATM commands

5.5.1AAL5 VC Statistics Commands

5.5.1.1Get atm aal5 stats

Description:

Use this command to get AAL5 VC statistics.

Command Syntax:

get atm aal5 stats [ifname <interface-name>]

Parameters:

Name

Description

 

 

Ifname

This parameter specifies the interface for which

<interface-name>

information is desired

 

Type : Get - Optional

 

Valid values : aal5-0 -

 

 

Example:

$ get atm aal5 stats ifname aal5-0

Output:

 

Low IfName

: atm-0

VPI

: 0

Tx Frames count

: 100

Tx Bytes count

: 1535

CRC Errors count : 0

VC IfName

: aal5-0

VCI

: 1

Rx Frames count : 85

Rx Bytes count

: 1200

Oversized SDU

: 0

Output Fields:

 

 

 

Field

Description

 

 

 

 

 

 

 

 

 

 

VC IfName

The name of the aal5 (aal5-0 etc) interface, for which statistics needs to be

 

 

 

 

 

retrieved.

 

 

 

 

 

 

 

 

 

 

Low IfName

This specifies the ATM port name. It can be : atm-0

 

 

 

 

 

 

 

 

 

 

VPI

This is the Virtual Port Identifier.

 

 

 

 

 

 

 

 

 

 

VCI

This is the Virtual Circuit Identifier.

 

 

 

 

 

 

 

 

 

 

Tx Frames count

The number of AAL5 CPCS PDUs transmitted on this AAL5 VCC.

 

 

 

 

 

 

 

 

 

 

Rx Frames count

The number of AAL5 CPCS PDUs received on this AAL5 VCC.

 

 

 

 

 

 

 

 

 

 

Tx Bytes count

The number of octets contained in AAL5 CPCS PDUs received on this AAL5 VCC.

 

 

 

 

 

 

 

 

 

 

Rx Bytes count

The number of octets contained in AAL5 CPCS PDUs received on this AAL5 VCC.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

154

 

 

IDL series User Guide