Verbose Mode Off:
Entry Created
Output Fields:
|
|
| Field | Description |
|
|
|
|
|
|
|
|
|
| IfName | Physical interface index |
|
|
|
|
|
|
|
|
|
| LowIfName | This is the IfIndex of the low interface on which this ATM port is configured. |
|
|
|
|
| Lower interface can be of type 94 or 124 or 125 or 0xfffffff9 |
|
|
|
|
|
|
|
|
|
| MaxVccs | This specifies the maximum number of VCCs (PVCCs), supported at this |
|
|
|
|
| ATM interface. This field is not valid if the atmtransporttype has the value |
|
|
|
|
| packet |
|
|
|
|
|
|
|
|
|
| MaxConfVccs | This specifies the current number of VCCs configured on this port. |
|
|
|
|
|
|
|
|
|
| MaxVpiBits | The maximum number of active VPI bits configured for use at the ATM |
|
|
|
|
| interface. |
|
|
|
|
|
|
|
|
|
| MaxVciBits | This specifies the maximum number of active VCI bits configured for use at |
|
|
|
|
| this ATM interface. |
|
|
|
|
|
|
|
|
|
| OAMSrc | Loopback source id assigned to the ATM port. The ATM port will respond to |
|
|
|
|
| all loopback cells, which carry this OAM id. This field is not valid if the |
|
|
|
|
| atmtransporttype has the value packet. |
|
|
|
|
|
|
|
|
|
| ORL(kbps) | This parameter specifies the output rate limiting value in KBPS to be applied |
|
|
|
|
| on this interface. |
|
|
|
|
|
|
|
|
|
| UnknownVPI | This parameter specifies the last seen unknown VPI on this ATM interface. |
|
|
|
|
| This field is not valid if the atmtransporttype has the value packet. |
|
|
|
|
|
|
|
|
|
| UnknownVCI | This parameter specifies the last seen unknown VCI on this ATM interface. |
|
|
|
|
| This field is not valid if the atmtransporttype has the value packet. |
|
|
|
|
|
|
|
|
|
| ProfileName | This specifies the scheduling profile to be associated with the ATM port. |
|
|
|
|
|
|
|
|
|
| Current Output Rate | This parameter specifies the current output rate value in KBPS that is |
|
|
|
|
| available on this interface, based on the minimum of DSL trained rate and |
|
|
|
|
| OutPut Rate limit configured for the ATM port. |
|
|
|
|
|
|
|
|
|
| trfclassprofileid | This specifies the traffic class profile to be associated with the ATM port. |
|
|
|
|
|
|
|
|
|
| Ctl Pkts Instance Id | This specifies the control packet instance identifier associated with this |
|
|
|
|
| interface. If the user does not provide any instance identifier while creating an |
|
|
|
|
| interface an instance is created internally from the default profile governed by |
|
|
|
|
| the macro 1 and associated to the interface. This will reduce the total number |
|
|
|
|
| to instances that can be now created by one. The default instance is |
|
|
|
|
| governed by macro 0. |
|
|
|
|
|
|
|
|
|
| ATM Transport Type | This specifies the transport type of the atm interface. This can be either Cell |
|
|
|
|
| which means that actual Atm Cells shall be received over the UTOPIA |
|
|
|
|
| interface, or Packet , which means that Pseudo Cells corresponding to |
|
|
|
|
| Packet VDSL shall be received over this ATM interface. This is not modifiable |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 162 |
|
| IDL series User Guide | |
|
|
|
|
|
|