mode.
Type : Optional
Valid values: | disable enable |
Example:
$ modify stp info priority 0x20 maxage 25 htime 5 fdelay 20 enable
Output: |
|
|
|
| |
Protocol Spec. : IEEE 8021D | Priority : 0x20 | ||||
Top. Changes | : 1 |
|
| Curr Top. Age(sec) : 35.0 | |
Desig Root | : 00:30:4F:10:5A:6C:DB:20 Root Cost : 0 | ||||
Root Port | : None |
| Hold Time (sec) : 1.0 | ||
Br Max Age(sec) : 25 |
| Curr Max Age (sec) : 20.0 | |||
Br Hello Time(sec) : 5 |
| Curr Hello Time(sec) :2.0 | |||
Br Fwd Delay(sec) : 20 |
| Curr Fwd Delay (sec) :15.0 | |||
STP status | : enable |
| |||
Verbose Mode Off |
|
| |||
Set Done |
|
|
|
| |
Output Fields: |
|
|
|
| |
| Field |
|
| Description |
|
|
|
|
|
|
|
| Protocol Spec |
|
| An indication of what version of the Spanning Tree Protocol is | |
|
|
|
| being run. |
|
|
|
|
|
| |
| Priority |
|
| The value of the | |
|
|
|
| two octets of the (8 octet long) Bridge ID. The other (last) 6 | |
|
|
|
| octets of the Bridge ID are given by the value of | |
|
|
|
| dot1dBaseBridgeAddress. | |
|
|
|
|
| |
| Top. Changes |
|
| The total number of topology changes detected by this bridge | |
|
|
|
| since the management entity was last reset or initialized. | |
|
|
|
| ||
| Curr Top. Age(Sec) |
| The time (in second) since the last time a topology change was | ||
|
|
|
| detected by the bridge entity. | |
|
|
|
|
| |
| Desig Root |
|
| The bridge identifier of the root of the spanning tree as | |
|
|
|
| determined by the Spanning Tree Protocol as executed by this | |
|
|
|
| node. This value is used as the Root Identifier parameter in all | |
|
|
|
| Configuration Bridge PDUs originated by this node. | |
|
|
|
|
| |
| Root Cost |
|
| The cost of the path to the root as seen from this bridge. | |
|
|
|
|
| |
| Root Port |
|
| The port number of the port which offers the lowest cost path from | |
|
|
|
| this bridge to the root bridge. | |
|
|
|
|
| |
| Hold Time (Sec) |
|
| This time value determines the interval length during which no | |
|
|
|
| more than two Configuration bridge PDUs shall be transmitted by | |
|
|
|
|
|
|
200 | IDL series User Guide |
|
|