Output field:

Field

Description

 

 

IfName

This parameter specifies the name assigned to this interface. Valid

 

Values starts from ehdlc-0 and continues to ehdlc-*

 

 

LowIfName

This specifies the lower interface index. This is the ifindex of the

 

DSL port on which EHDLC is being created. Valid Values start

 

from dsl-0 and continues to dsl-*

 

 

EHDLC Sar Status

This defines the segmentation and reassembly status of the

 

hdlc/dsl interface. HDLC supports only 508 as frame size, to

 

support longer snmp messages, it should be turned off. By

 

default, the option taken is 'disable'.

 

 

Admin Status

Administrative status of the Ehdlc interface

 

 

5.11 Ethemet Commands

5.11.1Dot3 stats Commands

5.11.1.1Get dot3 stats

Description:

Use this command to get.

Command Syntax:

get dot3 stats [ifname <interface-name>]

Parameters:

Name

Description

 

 

ifname

An index name that uniquely identifies an interface to

<interface-name>

an ethernet-like medium.

 

Type: Get -- Optional

 

Valid values:eth-0 – eth01

 

 

Example

 

 

 

 

 

$ get dot3 stats Ifname eth-0

 

 

 

 

Output

 

 

 

 

 

IfName

: eth-0

 

 

 

 

Alignment Errors

: 11

FCS Errors

: 12

 

 

Single Collision Frames

: 13

Multiple Collision Frames : 14

Deferred Tx Frames

: 15

Late Collisions

: 16

 

 

Excess Collisions Frames : 17

Mac Tx Errors Frames

: 18

 

 

 

 

 

 

 

 

IP DSLAM

 

 

 

313